Robert P. Elliott, Head of the Department, 4190 Bell Engineering Center, 575-4954
UNIVERSITY PROFESSOR EMERITUS LeFEVRE; PROFESSORS ELLIOTT, KNOWLES, MOORE, PARKER, WELCH; PROFESSORS EMERITI FORD, HEIPLE, JEFFUS; ASSOCIATE PROFESSORS ALGUIRE, DENNIS, GATTIS, GROSS, PLEIMANN, SCHEMMEL, SELVAM; ASSOCIATE PROFESSOR EMERITUS THORNTON; ASSISTANT PROFESSORS HALL, SOERENS, WANG
Degrees Conferred: M.S.C.E. (CVEG), M.S.En.E. (ENEG)
Ph.D. (ENGR) (See Engineering)
Requirements for the Master of Science Degree
1. Candidates for the Master of Science degrees who present a thesis are required to complete a minimum of 24 semester hours of course work and a minimum of six semester hours of thesis.
2. Candidates for the Master of Science degrees who do not present a thesis are required to complete a minimum of 30 semester hours of course work plus three semester hours credit of CVEG 563V, SP Master's Report, completed under the direction of the candidate's major adviser.
3. Candidates for the Master of Science degrees must present a cumulative grade average of 3.00 on all graduate courses and a cumulative grade average of 2.50 on all deficiency courses. The minimum acceptable grade is "C.''
4. Candidates for the Master of Science degrees must be continuously enrolled in CVEG 600V or CVEG 563V from the time they commence thesis or report until completion of graduation requirements.
5. Candidates for the Master of Science in Environmental Engineering (M.S.En.E.) degree must complete the following basic and engineering science courses in addition to the M.S. degree requirements stated above:
Semester Hours
Calculus I, II, III 12
Statics 3
Dynamics 3
Mechanics of Materials 3
Hydraulics 3
Hydrology 3
Public Works Economics 2
Thermodynamics or Electrical Circuits 3
Environmental Engineering 3
Chemistry 5
6. Upon admission to the Graduate School and acceptance in a program of study, the candidate will be assigned to a major adviser, who in consultation with the department head will select a graduate committee. The candidate will present to the committee a written statement of professional goals and objectives. The committee, meeting with candidate, will design a suitable graduate program to achieve these goals and objectives and will serve as the examination committee for the thesis/report and the final oral and/or written examination. The committee will meet at least once each semester to review the progress of the student. A positive recommendation by the committee is required for subsequent registration of the student.
Courses: Civil Engineering (CVEG)
4003 CAD and Visualization for Civil Structures Design process of infrastructures using 3 Dimensional (3D) Computer Aided Design and Engineering Visualization with a highway design emphasis. Students produce a digital video for a designed civil structure as a class project. Develop skills in photo matching for placement of designed structures in real environment. Prerequisite: senior standing or consent.
4053 Land Surveying Historical background of property surveys. Detailed consideration of original surveys and the United States Public Land Surveys. Writing adequate land descriptions. Interpretation of old descriptions. Excess and deficiency. Riparian rights. Field practice in relocation of old corners. Prerequisites: senior standing and CVEG 2053/ 2051L.
4060L Subdivision Planning and Layout Lab Corequisite: CVEG 4063.
4063 Subdivision Planning and Layout Subdivision planning to include traffic, streets, walks, size and slope of lots and blocks, location of utilities. Application of total integrated surveying system, including computer-aided drafting and design, to subdivision design. Lecture 2 hours, laboratory 3 hours per week. Corequisite: CVEG 4060L Prerequisites: CVEG 2053/ 2051L.
4070L Advanced Aerial Photogrammetry Lab Corequisite: CVEG 4073.
4073 Advanced Aerial Photogrammetry Geometry of aerial photographs, measurements from photographs, stereoscopic models, photogrammetric instrumentation, and map compilation. Lecture 2 hours, laboratory 3 hours per week. Corequisite: CVEG 4070L Prerequisites: CVEG 2053/ 2051L.
4080L Control Surveys Lab Corequisite: CVEG 4083.
4083 Control Surveys Sun and Polaris observations for astronomic azimuth, solar access studies; control traversing, leveling, triangulation; state plane coordinate systems. Lecture 2 hours, laboratory 3 hours per week. Corequisite: CVEG 4080L Prerequisites: CVEG 2053/2051L.
4143 Foundation Engineering Analysis and design of retaining walls, footings, sheet piles, and piles. Determination of foundation settlements in sand and clay. Prerequisites: CVEG 1113, 3133.
4153 Earth Structures The use of soil as a construction material including compaction, cement, lime, and fly ash stabilization. Special topics include seepage, slope stability, swelling, and collapsible soils. Prerequisite: CVEG 3133.
4223 Surface Water Hydrology Detailed investigations of hydrologic runoff relationships of surface and groundwater flow. Study of hydrograph and routing techniques as well as evaporation and sedimentation of storage reservoirs. Application of hydrologic techniques to engineering design. Prerequisite: CVEG 3223.
4243 Environmental Engineering Design Application of physical, biological, and chemical operations and processes to the design of water supply and wastewater treatment systems. Prerequisites: CVEG 3223, CVEG 3243.
4253 Small Community Wastewater Systems Design of innovative and alternative wastewater collection, transport, and treatment systems typically suited for rural and small community applications. Recitation 3 hours per week. Prerequisite: CVEG 3243.
4273 Water Resources Planning and Design Planning, design, and economics of water supply and waste-water disposal units. Topics include the analysis and design by optimization techniques to minimize construction and operational costs in meeting required water quality standards. Prerequisites: CVEG 3243, 3223.
4303 Reinforced Concrete Design I Design of reinforced concrete elements with emphasis on ultimate strength design supplemented by working stress design for deflection and crack analysis. Prerequisites: CVEG 2113, 3304.
4313 Structural Steel Design I Design of structural steel elements by elastic design procedures. Intensive treatment of tension members, beams, columns, and connections. Prerequisite: CVEG 2113, 3304.
4343 Reinforced Masonry Design Properties of masonry materials and assemblages. Masonry workmanship and quality control. Design of reinforced masonry elements against gravity and lateral loads. Design of masonry connections and joints. Application to one- and two-story buildings. Prerequisite: CVEG 3304, 4303.
4353 Timber Design Selection of timber beams, columns, and beam-columns. Physical properties of wood, analysis and design of timber connections. Truss design, glulam members, timber bridge design, treatment for decay, and fire protection. Prerequisite: CVEG 2113, 3304.
4363 Prestressed Concrete Design Analysis and design of prestressed concrete flexural sections by working stress and ultimate strength design methods. Flexural behavior, moment-curvature diagrams, draping, anchorage zone design, torsion and shear, deflections, and prestress losses. Design of composite sections and continuous beams. Prerequisite: CVEG 3304, 4303.
4373 Plastic Steel Design Intensive treatment of the principles of plastic analysis. Design of continuous beams, industrial frames, and multi-story structures by plastic methods. Prerequisite: CVEG 3304, 4313.
4383 Structural Steel Design II Continuation of elementary steel design of connections, beam columns, and composite members. Load and resistance factor design is introduced with the design of an actual truss-roofed mill building. Prerequisite: CVEG 3304, 4313.
4393 Reinforced Concrete Design II Optimum design of continuous beams. Design of walls, footings, slender columns, torsion and shear in beams, deep beams, brackets and corbels. Introduction to and design of structural slabs by the direct design method. Prerequisite: CVEG 3304, 4303.
4403 Public Transportation An introduction to the systems and technologies that provide the public transportation alternatives to the multi-modal transportation systems in urban and rural areas. A comparison of alternatives, procedures for planning, management and operations, and policies of public transportation. Prerequisite: CVEG 3413 or consent of instructor.
4413 Pavement Evaluation and Rehabilitation Introduction of concepts and procedures for pavement condition surveys; evaluation by nondestructive and destructive testing; maintenance strategies; rehabilitation of pavement systems for highways and airfields; pavement management systems. Prerequisite: CVEG 4433 or consent of instructor.
4423 Highway Geometric Design The geometric design of streets and highways, based on theory and application of driver and vehicle characteristcs. Prerequisite: CVEG 3413.
4430L Transportation Pavements and Materials Lab Corequisite: CVEG 4433.
4433 Transportation Pavements and Materials Study of the engineering properties and behavior of materials commonly used in transportation facilities as they relate to the design and performance of flexible and rigid pavement systems. Lecture 2 hours, laboratory 3 hours per week. Corequisite: CVEG 4430L; Prerequisite: CVEG 3133.
4513 Construction Methods Methods and procedures for designing and constructing civil engineering projects, estimation of project costs, manual and computer techniques for controlling civil engineering projects. Prerequisite: senior standing.
4803 Structural Loadings Theoretical background to and practical code requirements for various structural loadings. These include dead loads, occupancy loads, roof loads and ponding, snow loads, granular loads, vehicular loads, wind loading, and seismic loads. Prerequisites: CVEG 3304 and either 4303 or 4313.
4853 Urban Planning and Practice Introduction to the theory and practice of contemporary urban planning; emphasis upon the understanding and applications of urban planning as an interdisciplinary and interactive process necessary to the preparation of comprehensive land use plans and plan implementation; study through assigned readings, development cases, and simulation of urban change dynamics and impact of decision-making. (Same as ENVD 4853) (Credit cannot be received for both CVEG 4853 and ENVD 4853.)
5120L Measurement of Soil Properties Lab
5123 Measurement of Soil Properties Consideration of basic principles involved in measuring engineering properties of soils. Detailed analysis of standard and specialized soil testing procedures and equipment. Lecture 2 hours, laboratory 3 hours per week. Prerequisite: CVEG 3133.
5143 Transportation Soils Engineering Advanced study of the properties of surficial soils; soil classification systems; pedology; soil occurrence and variability; subgrade evaluation procedures; repeated load behavior of soils; soil compaction and field control; soil stabilization; soil trafficability and subgrade stability for transportation facilities. Prerequisite: CVEG 3133 or consent of instructor.
5163 Advanced Soil Mechanics Study of consolidation, shear strength, clays, bearing capacity, and other soil mechanics topics. Emphasis on understanding the basis of soil mechanics topics. Prerequisite: CVEG 4143.
5173 Advanced Foundations Study of soil-supported structures. Topics include drilled piers, slope stability, pile groups, negative skin friction, foundation design from the standard penetration test and Dutch cone, and other specialized foundation design topics. Prerequisite: CVEG 4143.
5210L Instrumental Methods for Water and Waste-water Analysis Lab
5212 Instrumental Methods for Water and Waste-water Analysis Introduction to the basic theory and techniques of modern instrumental procedures used for physical, chemical, and biological analysis in environmental engineering. Instrumental methods include atomic absorption, gas chromatography, and carbon analysis. Lecture 1 hour, laboratory 3 hours per week. Prerequisite: CVEG 5234.
5230L Water and Wastewater Analysis Lab
5234 Water and Wastewater Analysis Application of chemistry to environmental engineering. Quantitative determinations of constituents in water and wastewater. Principles of bacteriological laboratory techniques. Lecture 3 hours, laboratory 3 hours per week. Prerequisite: CVEG 3243.
5242 Groundwater Hydrology Detailed analysis of groundwater movement, well hydraulics, groundwater pollution and artificial recharge. Surface and subsurface investigations of groundwater and groundwater management, saline intrusion and groundwater modeling will be addressed. Prerequisite: CVEG 3223.
5253 Sanitary Microbiology Fundamental and applied aspects of microbiology and biochemistry relating to water quality control, wastewater treatment, and stream pollution. Prerequisite: CVEG 3243.
5263 Stream Pollution Analysis The determination and application of deoxygenation and reaeration rates to stream pollution analysis. A study of biological degradation rates for municipal and industrial wastes. Prerequisite: CVEG 3243.
5273 Advanced Pollution Control Design Design of advanced and tertiary processes for wastewater treatment. Innovations in wastewater treatment by both aerobic and anaerobic wastewater treatment processes. Prerequisite: CVEG 4243.
5283 Solid Waste Management Collection, processing and disposal of solid waste with emphasis on incineration, and sanitary landfilling systems. Supplementary transportation and transfer systems are included. Hazardous waste disposal design and regulatory considerations are discussed. Prerequisite: CVEG 3243 or consent.
5293 Water Treatment & Distribution System Design Design of industrial and municipal water treatment plants. Discussion of raw and treated water requirements for the several uses. Distribution system analysis and design including distribution storage and pumping. Prerequisite: CVEG 3243.
5313 Matrix Analysis of Structures Energy and digital computer techniques of structural analysis as applied to conventional forms, space trusses, and frames. Prerequisite: CVEG 3304.
5323 Structural Dynamics Dynamics response of single and multidegree of freedom systems. Modal analysis. Response spectra. Computer programs for dynamic analysis. Design considerations for structures subjected to time-varying forces including earthquake, wind, and blast loads. Prerequisite: CVEG 3304.
5343 Highway Bridges Economics of spans, current design and construction specifications, comparative designs. Possible refinements in design techniques and improved utilization of materials. Prerequisites: CVEG 4313, 4303.
5363 Analysis of Thin Shell Structures Analysis and design of hyperbolic paraboloids, domes, folded plates, and barrel vaults. Theoretical development followed by use of design aids. Prerequisites: CVEG 4303, 4313.
5373 Advanced Structural Steel Design Emphasis on design of existing steel structures. Continuous beams, plate girders, and multistory frames. Prerequisite: CVEG 4383.
5383 Finite Element Methods in Civil Engineering An understanding of the fundamentals of the finite element method and its application to structural configurations too complicated to be analyzed without computer applications. Application to other areas of civil engineering analysis and design such as soil mechanics, foundations, fluid flow, and flow through porous media. Prerequisite: graduate standing and consent of the instructor.
5393 Advanced Reinforced Concrete I Intensive treatment of the fundamental mechanics of reinforced concrete, torsion, prestressed concrete, yield live theory, and selected topics. Prerequisite: CVEG 4303.
5403 Advanced Reinforced Concrete II Design of two-way slabs, flat slabs, and other floor systems; circular fluid and dry storage tanks; and rectangular tanks, walls, footings, and detailing. Prerequisite: CVEG 4303.
5413 Transportation and Land Development Study of interaction between land development and the transportation network. Application of planning, design, and operational techniques to manage land development impacts upon the transportation system, and to integrate land layout with transportation network layout. Prerequisite: graduate standing or consent of instructor.
5423 Structural Design of Pavement Systems An introduction to the structural design of pavement systems including: survey of current design procedures; study of rigid pavement jointing and reinforcement practices; examination of the behavioral characteristics of pavement materials and of rigid and flexible pavement systems; introduction to structural analysis theories and to pavement management concepts. Prerequisites: CVEG 3413, 4433.
5433 Traffic Engineering Fundamental and applied aspects of driver and vehicle characteristics as they relate to geometric design and the installation and operation of traffic control devices. Techniques to develop and analyze traffic data for the improvement of traffic flow and safety. Prerequisite: CVEG 3413 or graduate standing.
5443 Transportation Planning Methods Procedures and methodologies for developing multi-modal transportation plans in urbanized areas. The development and utilization of transportation studies used in transport behavior and modeling. Prerequisite: CVEG 5433 or graduate standing.
5450L Asphalt Mix Design and Construction Lab
5453 Asphalt Mix Design and Construction Theory and practice of asphalt concrete mix design for pavements and bases including specifications and construction methods for hot-mixes and surface treatments. Lecture 2 hours and laboratory 3 hours per week. Prerequisites: CVEG 3413, 4433.
5463 Transportation Network Modeling An analytical approach to the use of mathematical techniques and computer models to represent urban transportation systems. Deterministic and stochastic methods for trip generation, distribution, modal choice, and assignment. Prerequisites: CVEG 5443 or consent of instructor.
5473 Transportation System Characteristics Intro-duction to traffic flow theory, including traffic stream interactions and capacity. Applications for planning, design, operations. Prerequisites: CVEG 3413 and graduate standing; or consent of instructor.
5483 Transportation Management Systems Six transportation management systems are explored: pavement, bridge, intermodal, public transportation, safety, and congestion. System approaches are presented. Techniques are introduced on how to optimally allocate resources. Pavement and bridge structure basics are discussed and their performance parameters are presented. Case studies are used to illustrate the interfaces among various modes of transportation. Safety and congestion problems in transportation are addressed.
5493 Infrastructure Management with GIS and DB Use of the major components of a Geographical Information System (GIS). Learn to define project schema, create a project build categories and features, and perform database joints. Use of dynamic segmentation and multimedia capabilities. Application of Relational Database Management System (RDBMS) and database interface services to GIS. Introduction to Global Positioning System (GPS). Prerequisite: consent.
562V Research (1-6) Fundamental and applied research. Prerequisite: graduate standing.
563V Special Problems (1-6) One to 6 hours of credit. Pre-requisite: graduate standing or permission of department head.
5730L Advanced Wastewater Process Design and Analysis Lab
5734 Advanced Wastewater Process Design and Analysis Application of advanced techniques for the analysis and design of wastewater treatment facilities. Physical, chemical and biological processes for removing suspended solids, organics, nitrogen, and phosphorus. Laboratory treatability studies will be used to develop design relationships. Lecture 3 hours, laboratory 3 hours per week. Prerequisite: CVEG 5234 or consent of the instructor.
5753 Air Pollution Atmospheric dispersion of gaseous and particulate pollutants. Determination of stack height requirements. Control equipment selection and design for particulate and gaseous pollutants. (Same as CHEG 5753.) Prerequisite: graduate standing or consent of instructor.
5883 Boundary Element Methods in Engineering Introduction to the boundary element method with applications to problems of elasticity, flow through porous media, fluid flow, heat conduction, and time dependent problems in potential flow and elasticity. Programming and use of appropriate computer programs. Prerequisite: graduate standing or consent of the instructor.
600V Master's Thesis (1-6) Prerequisite: graduate standing.
700V Doctoral Dissertation (1-18) Prerequisite: candidacy and consent.
[Table
of Contents] - [Search]
- [Comments]